Translate
On-site sewage/septic repair or replacement
A repair proposal and permit are required when any change(s) or system replacements are made to your septic system. Below is a step-by-step guide for this process depending on what type of repair permit you need.
Septic repair permit
-
Contact a certified master installer in King County.
-
Master installer submits a repair proposal to Public Health – Seattle & King County.
-
If approved by Public Health – Seattle & King County, an application for permit is submitted by the master installer. If disapproved, a new or modified proposal must be submitted, possibly by a licensed designer.
-
After permit is issued by Public Health – Seattle & King County, repair is completed by master installer.
-
Repair is inspected by Public Health – Seattle & King County.
-
As-built of repair is submitted to Public Health – Seattle & King County by the master installer.
-
As-built of replacement septic system submitted by the designer or qualified professional engineer.
Septic replacement permit
-
Depending on size of replacement, contact a certified designer, master installer or qualified professional engineer.
-
Your septic system professional submits a design proposal, called a 'site application', to Public Health – Seattle & King County.
-
If approved by Public Health – Seattle & King County, an application for permit is submitted by your septic system professional. If disapproved, a new or modified proposal must be submitted.
-
The designer or qualified professional engineer conducts a pre-installation (also known as, stub-out) inspection and gives report to the master installer and Public Health – Seattle & King County.
-
After permit is issued by Public Health – Seattle & King County, the installation is completed by master installer.
-
Installation is inspected by the designer.
-
Installation is inspected by Public Health – Seattle & King County.
Building permit
-
You may apply for this review prior to or at the same time as the Building Department's review of your application. Please consult with your building official.
-
While preparing your application, it is important to accurately describe the location of all septic system components on your site plan. Search and download a drawing of your septic system (as-built drawing).
-
The application must be filled out with 3 complete packages.
-
Each application is reviewed by an inspector and receives a site visit. Examples the inspector are looking for includes:
- Age of septic system
- Condition of system
- Type of system
- Location of system as compared to area of remodel
- Presence of a reserve drainfield area
- Size of remodel
- existing square footage vs. square footage being added
- Type of addition(s)/remodel
- are bedrooms being added?
- Water source
- a drinking water well requires certain setbacks to structures
- structures must be served by an approved water source
- Record drawing and past permit history
-
Due to the scope of your remodel and condition, location and age of your septic system, you may be required to have the septic system evaluated by a licensed septic professional or in some cases a new on-site sewage/septic system meeting all current regulations may be required. The inspector will notify you in writing what this evaluation must include and what type of septic professional must be contacted.
-
You may also be required to upgrade or replace your septic system.
Limited repair permit
-
Under certain circumstances, you may have to contact a certified master installer or on-site system maintainer in King County. If you have a conventional gravity septic system, the repair may be completed before obtaining a permit. If you have any questions about when to apply for a repair permit, please call our office at 206-477-8050.
-
Master installer or on-site system maintainer submits repair proposal for limited repair to Public Health – Seattle & King County.
-
Repair is completed by the master installer or on-site system maintainer.
-
Record of repair is submitted to Public Health – Seattle & King County by the master installer or on-site system maintainer.