Bicycle safety tips
Courtesy of the Northwest Bicycle Federation & the Washington State Association of Police Chiefs and Sheriffs
Obey traffic laws
Traffic violations cause the majority of bicycle/motor vehicle accidents. Following traffic laws makes bicycles predictable to other drivers.
- Yield when entering the roadway.
- Stop or yield when required by a sign or light.
- Always ride in the direction of traffic.
- Use proper lighting at night.
- Never ride while intoxicated.
- Signal your intentions to other drivers.
Wear a helmet
The law requires bicyclists to wear helmets throughout incorporated and unincorporated King County (Board of Health Code, Title 9). Head injuries cause the majority of bicycle accident deaths. Your head is worth the protection.
Use good lighting at night
Reflectors are not enough. A white front light and red rear reflectors are required. In addition, use a red rear light or flashing beacon, especially on dark rural roads where drivers need plenty of warning. Bright clothes increase visibility both day and night, but are not enough by themselves for night riding.
Keep bicycles mechanically safe and loads secure.
Be in control of your bicycle. If a bicycle is too big, hard to handle or if loads shift, an accident can result.
When bicycling on sidewalks, trails or paths:
- Keep speeds down.
- Yield to pedestrians.
- Yield to traffic before entering or crossing a roadway.
Adults should not ride on a sidewalk unless there is a specific reason (such as crossing a narrow bridge). Note: many communities have specific local laws concerning bicycling on sidewalks and paths; check with city officials for information.
Train and supervise children
Learning to ride takes many new skills. Adult supervision prevents accidents. Bicyclists of any age should not ride in traffic until they feel skilled with their equipment and traffic rules.
Take special care on rough or slippery surfaces
- When approaching a slippery surface (loose gravel, wet metal surfaces, or wet painted surfaces) go slow and avoid sudden stops or turns.
- Ride slow over rough surfaces (potholes, rocks and cracks) and stand up to absorb the shock in your legs and arms. Cross railroad tracks and cracks in the roadway at a right angle to avoid catching the front wheel.
- "Turtles," ceramic mounds used to mark some lane separations, and parallel drain grates that can catch a wheel are special hazards to avoid.
Don't lock your wheels when stopping
Use both brakes during a hard stop. Keep your weight low and back on the saddle. If the rear wheel starts to skid, reduce the force on both brakes. Practice this.
Ride safely when in a group
Each rider must stop and signal when required. Keep groups small (about 6 riders maximum).When the group stops to rest keep all riders off of the roadway.
Don't ride too close to parked cars
Opening car doors can cause an accident. Leave about 3 feet of "shy" distance.
For more information, contact:
King County Department of Transportation
Road Services Division, Planning Unit
201 South Jackson Street MS KSC-TR-0813
Seattle, WA 98104-3856
Information from the Road Services Division's Web site is available to people with disabilities in alternate formats upon request by calling 206-263-6482 or 711 for the TTY relay service.
= External link