Building and land use code FAQWhat Building Code is used by DDES?The 2006 International Building Codes became effective in Washington State on July 1, 2007. This code family consists of the International Building Code (IBC), the International Residential Code (IRC), the International Mechanical Code (IMC), the International Fire Code (IFC) and the International Property Maintenance Code (IPMC). King County's amendments to the codes are contained in Title 16 (PDF*, 398KB) and Title 17 (PDF*, 72KB) of the King County Code, online at www.kingcounty.gov/council/legislation/kc_code.aspx. Additionally, the amendments to the IBC, IRC, IMC and IFC will be available as insert pages from the DDES cashier's office. The Washington State Building Code Council also has information about the adoption of codes and the Washington State Amendments at http://sbcc.wa.gov/ (external link). TO TOP What are the International Residential Code climatic and geographic design criteria for King County?The climatic and geographic design criteria for King County are available online in Table R301.2(1) (PDF*, 92KB) of the 2003 International Residential Code. TO TOP How can I get more information on the Energy Code?DDES Customer Information Bulletin #27, Residential Energy Codes (PDF*, 124KB), provides detailed information. Customers also can call DDES at 206-296-6600 and ask to speak with a plans examination engineer. TO TOP How do I determine snow load requirements for my proposed building?King County determines snow loads via the Structural Engineers of Washington study. If you know the approximate general area of the County in which your site is located, you can access the snow load map at: www.kingcounty.gov/property/permits/gis/ReferenceMaps.aspx. Simply click on the King County Ground Snow Load map section you are interested in. As you zoom into your site, determine the appropriate isobar and calculate the ground snow load by using the following equation: ground elevation above sea level in feet multiplied by the isobar line number equals ground snow load in pounds per square foot. Example: A site in Maple Valley section 14, T22N, R6E at 700 ft elevation. From the snow load map, the isobar line is determined to be .052. The ground snow load would be 36 psf [700 ft x .052 = 36 psf]. TO TOP *Note: To view PDFs, free software from Adobe is required. See helpful hints for assistance. To request this information in alternate formats for people with disabilities, call 206-296-6600 or TTY Relay: 711.
|
