Plumbing and gas piping service fees
If you have any questions about the fee schedule, please call the Environmental Health Services Division at 206-205-4394.
| DESCRIPTION | Fees | |
|---|---|---|
| Plumbing permits: | ||
 |
Base fee, includes 1 fixture/trap | $110 |
|
Additional fixture or trap, each | $12 |
|
ATMOS vacuum breaker (1-5 ea device) | $10 |
|
Over five each device | $5 |
|
Pressure type vacuum breaker | $10 |
|
Inspections made outside regular working hrs or inspections request for work not covered by permit | Actual cost |
|
Location inspection of factory housing or modular unit, per dwelling or modular unit (plumbing & gas piping) | $20 |
|
Additional fixtures installed after factory installation, each | $10 |
| Plumbing permit obtained after work commences for which a permit is required: | ||
|
Emergency situation | Normal permit fee |
|
Non-emergency situation | Double the normal permit fee |
|
Re-inspection fee, plumbing or gas | $115 |
|
Refund for unexpired permit where plumbing work has not begun | Refund all, but $110 of the permit amount |
|
Permit renewal/date extension | Lesser of 1/2 original permit fee or $50 |
| Backflow Prevention Permit: | ||
|
Base Permit Fee(includes one reduced pressure backflow prevention device or double check valve assembly | $110 |
|
Each additional device/assembly | $12 |
|
Plumbing Appeal Board application | $100 |
| Gas Piping Permit: | ||
|
Base fee, includes 1 outlet | $110 |
($0 if taken out in conjunction with a plumbing permit for an appliance with both plumbing & gas connection) | ||
|
Additional outlets, each | $12 |
| Corrosion Prevention Construction Permit: | ||
|
New Installation | $100 |
|
Renovation ($1,000 or more value) | $50 |
|
Alteration | $15 |
| Corrosion Prevention Annual Operating Permit: | ||
|
Full Year | $100 |
|
New Installations | $8/month for remaining months |